VEDIC HEARTH
ShopCollectionsCareFAQsJournalAboutDelivery & Returns

About the workshop

Vedic Hearth makes hand-hammered culinary peetal cookware in small workshop batches in India. This page sets out who makes each piece, the metallurgical standards we hold to, and the marketing claims we deliberately refuse to make.

The craft and provenance

Every cooking vessel in our collection begins as a heavy circular blank of culinary brass, cut from thick virgin sheets. It is shaped, raised, and finished by hand through the traditional techniques of Indian metalsmithing clusters — an artisan craft form refined over centuries across Punjab, Haryana, and Uttar Pradesh.

A single kadhai takes several hours on the anvil. The metal is heated, shaped over rounded stakes, and then work-hardened with thousands of deliberate hammer blows. These overlapping dimples are not decorative stamps applied by a mechanical press; they are the physical signature of the hammer compressing the crystalline structure of the alloy, strengthening the walls and eliminating internal air pockets.

Metallurgical standards: 60:40 culinary peetal

Cookware demands strict metallurgical discipline. We use a balanced 60:40 copper-to-zinc alloy ratio (60% copper, 40% zinc). This specific proportion provides ideal mechanical malleability for hand-raising alongside exceptional thermal conductivity:

  • Thermal Conductivity: 115 W/m·K — more than seven times faster than stainless steel (16 W/m·K) and far more responsive than cast iron (52 W/m·K).
  • Material Density: 8.5 g/cm³ — delivering the heavy thermal inertia required to maintain steady oil and simmer temperatures without sudden drops when cold food enters the pan.
  • Wall Gauge: 2.5 mm to 3.2 mm thickness — preventing scorching hot spots and ensuring a vessel that never warps across decades of flame cooking.

Pure food-grade kalai (tin lining)

Bare brass reacts naturally with acidic ingredients such as tomatoes, tamarind, curd, and lime juice. To make peetal completely food-safe, every interior cooking surface is lined with pure tin (*kalai*).

We use 99.85%+ pure food-grade tin, never diluted lead or industrial solders. The tinning takes place over glowing charcoal coals: the craftsman heats the brass to approximately 250°C, dusts the surface with virgin ammonium chloride flux (*nausadar*), touches a pure tin bar to the hot metal, and sweeps it across the wall with a pad of raw cotton. The tin bonds metallurgically to the copper in the brass, creating an intermetallic, non-reactive protective barrier between 15 and 25 microns thick.

Why our batches stay small

Hammering is slow physical work. A master smith can finish only two to three large vessels in a working day. A batch is ready when the final rim is trued and the lining inspected — never rushed to meet an artificial inventory target.

Because our pieces move directly from the workshop to your kitchen, prices remain identical every day of the year. We run no flash sales, seasonal markups, or false strike-through discounts. A customer who ordered six months ago paid the same fair price as someone ordering today.

What we deliberately refuse to claim

Traditional Indian metalware is often surrounded by exaggerated health claims — assertions that cooking in brass cures thyroid disorders, boosts immunity, or infuses miraculous minerals into food.

We do not repeat any of this language. If a cooking vessel is properly tin-lined, food touches tin, not bare brass, meaning copper leaching does not occur. We rely solely on proven kitchen physics and material truth:

  • Brass spreads heat rapidly and evenly, reducing cooking time and saving fuel.
  • The tin lining provides an inert, non-reactive cooking surface that develops a natural cooking patina.
  • Unlike synthetic non-stick coatings that degrade irreversibly, kalai can be stripped and renewed indefinitely.
  • A heavy brass vessel cannot end up in a landfill; it is a generational tool designed to outlive its owner.

Reach the workshop directly

If you have questions about hob sizing, weights, or care routines, use our enquiry form. One person answers each enquiry directly from the workshop. Delivery standards and return terms are documented on our shipping page, and our detailed maintenance notes are published in the journal and care guide.

VEDIC HEARTH

Vedic Hearth Craft Guild

Traditional Hand-Forged Brassware

Handcrafted in India

Enquiries: splpwn@gmail.com

UNCOVER MORE

  • About Vedic Hearth
  • Contact the Workshop
  • Metalcraft Directory: Buypeetal.com
  • Frequently Asked Questions
  • Privacy Policy
  • Shipping & Delivery Policy
  • Terms of Service
  • Return and Refund Policy

CARE & METALLURGY

  • Brass Cleaning Guide (5 Methods)
  • Why Home Kalai is Dangerous
  • Is Brass Safe for Cooking? (Kalai Truth)
  • Cooking Curd & Tamarind in Brass
  • Relining & Daily Care Schedule
  • Kansa Care & Dining Traditions
  • Order Tracking
  • Grievance Handling & Escalation

SHOP BY CRAFT

  • Culinary Brass Cookware
  • Peetal and Kansa Guide
  • Peetal and Induction Guide
  • All Handcrafted Pieces
  • Festive & Wedding Gifting
VEDIC HEARTH
LEGACY OF INDIAN CRAFTSMANSHIP

© 2026 Vedic Hearth Crafts. Handcrafted in India.

🇮🇳 INR (₹)Enquiries open